Greasing Equipment
Hand Operated
Air Operated
Dispensing Guns
Fuel Transfer Equipment
Hand Operated
Electric Pumps
Oil Transfer Equipment
Hand Operated
Air Operated
Specialty Pumps
Hand Operated
Dispensing Equipment
Oil Control Guns
High flow oil delivery gun
Mechanical Hose End Guns
Electronic hose end guns
Flow Meters
Fuel Meters
Water Meter
Oil Meter
Hose Reels
Retracta®Auto Rewind Hose Reels
Metal Hose Reels
Oil And Grease Systems
Portable Oil System
Oil System
Grease Sytem
Oil Evacuation System
Fluid management & control system
Grease Fittings
Greasing Kits
Greasing Couplers
Grease Extension Hoses
Air Equipment
Manual Equipment
Air Line Accessories
Oil Control Gun
Suction Tubes
Oil Feeder Hoses
Fuel Filters
Fuel Nozzles

  Flow Meters
Oil Meter :

Oil Meter IM50, IM50P, IM75, IM75P
IM50 (LCD)
IM50P ( Pulse Output)
IM75 (LCD)
IM75P ( Pulse Output)
The IM50 & 75 have been designed specifically to dispense lubricating oils, diesel and kerosene. These high pressure, positive displacement-type meter is suitable for all in-line and end-of-line applications and features a rugged and robust register with integrated electronics and large LC display.


  • Robust aluminium construction and fully sealed against dust and water splash
  • Easy to read and operate resetable six-digit display with ability to show batch, reset total, non-reset total and rate of flow
  • User selectable display units: Litres, Gallons, Pints, Quarts
  • Available with LC display or pulse output (pulse output model with 1 m fly lead available with either reed switch or hall effect sensor)
  • Average battery life of two years (battery type: 2 x AAA alkaline)
  • Protective boot standard on LCD version - optional coloured boots
    available: red, blue, yellow, green, black
  • 10 year warranty
  • 10 year parts availability


Specifications - IM50/IM50P

  • wetted components:
    acetal (suitable with oils), aluminium,
    nitrile (NBR), mild steel
  • accuracy:
    ±0.5% of reading
  • flow range :
    1-30 L/min (0.26-8 US gal/min)
  • max. working pressure:
    1,030 kPa (150 psi, 10.3 bar)
  • inlet thread :
    1/2" BSPT or NPT (F)
  • outlet thread:
    1/2" BSPT or NPT (F)
  • operating temperature:
    5°C (41°F) to +55°C (131°F)
  • weight(approx):
    430 g (0.95 lbs)
  • K factor:
    112ppL (424 pp USG)

Specifications - IM75/IM75P

  • wetted components:
    PEI resin, aluminium, nitrile (NBR),
    mild steel mild steel
  • accuracy:
    ±0.5% of reading
  • flow range :
    3-60 L/min (0.8-15.8 US gal/min)
  • max. working pressure:
    10 350 kPa (1,500 psi, 103.5 bar)
  • inlet thread :
    3/4" NPT (F)
  • outlet thread:
    3/4" NPT (F)
  • operating temperature:
    5°C (41°F) to 800C (176°F) for IM75P
  • weight(approx):
    980 g (2.16 lbs)
  • K factor:
    54.6 ppL (206.5 pp USG)

© copyright 2007 Elbers Co., Ltd. All Rights Reserved.
Designed & Developed by | HostingDynamo